View M170E5-L05_1677056.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..net
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 2 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 6. interface timing ------------------------------------------------------- 15 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 17 7.1 test conditions 7.2 optical specifications 8. packaging ------------------------------------------------------- 23 8.1 packing specifications 8.2 packing method 9. definition of labels ------------------------------------------------------- 25 10. precautions ------------------------------------------------------- 26 10.1 assembly and handling precautions 10.2 safety precautions 11. mechanical characteristics ------------------------------------------------------- 27
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 3 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 revision history version date section description ver 1.0 ver 1.1 apr., 10 ?03 may, 08 ?03 - 1.4 5.1 7.2 M170E5-L05 specifications was first issued ?c surface treatment. connector type. optical specification.
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 4 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 1. general description 1.1 overview the m170e5 -l05 model is a 17.0? tft-lcd module with a 4-ccfl backlight unit and a 30-pin 2ch-lvds interface. this module supports 1280 x 1024 sxga mode and displays 16.2m colors. the inverter module for the backlight unit is not built in. 1.2 features - wide viewing angle - high contrast ratio - fast response time - high color saturation (ebu like specifications) - sxga (1280 x 1024 pixels) resolution - de (data enable) only mode - lvds (low voltage differential signaling) interface 1.3 application - tft lcd monitor 1.4 general specificati0ns item specification unit note active area 337.92 (h) x 270.34 (v) (17.0? diagonal) mm bezel opening area 341.9 (h) x 274.4 (v) mm (1) driver element a-si tft active matrix - - pixel number 1280 x r.g.b. x 1024 pixel - pixel pitch 0.264 (h) x 0.264 (v) mm - pixel arrangement rgb vertical stripe - - display colors 16.2m color - transmissive mode normally white - - surface treatment hard coating (3h), ag (haze 25%) - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 358.0 358.5 359.0 mm vertical(v) 296.0 296.5 297.0 mm module size depth(d) - 17.0 17.5 mm (1) weight - tbd g - i/f connector mounting position the mounting inclination of the connector makes the screen center within 0.5mm as the horizontal. (2) note (1) please refer to the attached drawings for more information of front and back outline dimensions. (2) connector mounting position +/- 0.5mm
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 5 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 50 g (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) lcd cell life time l cell 50,000 - hrs mtbf based note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel surface should be 0 oc min. and 60 oc max. note (3) 11ms, half-sine wave, 1 time for x, y, z. note (4) 10 ~ 300 hz, sweep rate 10 min, 30 min for x,y,z axis note (5) upon the vibration and shock tests, the fi xture used to hold the module must be firm and rigid enough to prevent the module from twisting or bending by the fixture. relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 90 80 40 60 20 5 storage range
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 6 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +6.0 v logic input voltage v in -0.3 4.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = 6.5 ma lamp current i l - 7.5 ma rms lamp frequency f l - 80 khz (1), (2) note (1) permanent damage might occur if the module is operated at conditions exceeding the maximum values. note (2) specified values are for lamp (refer to 3.2 for further information).
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 7 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 3. electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 4.5 5.0 5.5 v - ripple voltage v rp - -- 100 mv - rush current i rush - -- tbd a (2) white - 420 tbd ma (3)a black - 570 tbd ma (3)b power supply current f v = 75hz, vcc=4.5v lcc - - tbd ma (4) lvds differential input voltage vid -100 - +100 mv lvds common input voltage vic -- 1.2 -- v logic ?l? input voltage (sellvds) vil vss - 0.8 v note (1) the module is recommended to operate within specification ranges listed above for normal function. note (2) measurement conditions: vcc rising time is 470 s 470 s +5.0v gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +5.0v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input)
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 8 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (3) the specified power supply current is under the conditions at vcc = 5.0 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power supply current is under the conditions at vcc = 4.5 v, ta = 25 2 oc, f v = 75 hz, whereas a power dissipation check patte rn (black pattern) below is displayed. active area a. white pattern active area b. black pattern active area black pattern
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 9 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 3.2 backlight unit value parameter symbol min. typ. max. unit note lamp input voltage v l 585 650 715 v rms i l = 6.5 ma lamp current i l 2.0 6.5 7.5 ma rms (1) - - 1260(25 o c) v rms (2) lamp turn on voltage v s - - 1500 (0 o c) v rms (2) operating frequency f l 45 55 80 khz (3) lamp life time l bl 40,000 50,000 - hrs (5) i l = 6.5 ma power consumption p l - 16.9 - w (4), i l = 6.5 ma note (1) lamp current is measured by utilizing hi gh-frequency current meters as shown below: ta = 25 2 oc note (2) the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise, the lamp may not be turned on normally. note (3) the lamp frequency may produce interference with horizontal synchronization frequency from the display, which might cause line flow on the displa y. in order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as far as possible. note (4) p l = i l ?? v l note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 ? 2 o c and i l = 2.0 ~ 6.5 marms until one of the following events occurs: (a) when the brightness becomes or lower than 50% of its original value. (b) when the effective ignition length becomes or lower than 80% of its original value. (effective ignition length is defined as an area that has less than 70% brightness compared to the brightness in the center point.) note (6) the waveform of the voltage output of in verter must be area-symmetric and the design of the inverter must have specifications for the modul arized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenc ed by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter should be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occurs. if the above si tuation is confirmed, the module should be operated in the same manners when it is installed in your instrument. lcd module inverter current meter yokogawa 2016 a 1 a hv (blue) 2 lv (black) 1 a hv (pink) 2 lv (white)
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 10 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within ?? 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 11 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 4. block diagram 4.1 tft lcd module 4.2 backlight unit tft lcd panel (1280x3x1024) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage input connector (jae-fi-xb30srl-hf11) gnd v l vcc rxo0(+/-) rxo1(+/-) rxo2(+/-) rxo3(+/-) rxoc(+/-) rxe0(+/-) rxe1(+/-) rxe2(+/-) rxe3(+/-) rxec(+/-) sellvds lamp connector (jst-bhsr-02vs-1) 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white) 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white)
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 12 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 5. input terminal pin assignment 5.1 tft lcd module pin name description 1 rxo0- negative lvds differential data input. channel o0 (odd) 2 rxo0+ positive lvds differential data input. channel o0 (odd) 3 rxo1- negative lvds differential data input. channel o1 (odd) 4 rxo1+ positive lvds differential data input. channel o1 (odd) 5 rxo2- negative lvds differential data input. channel o2 (odd) 6 rxo2+ positive lvds differential data input. channel o2 (odd) 7 gnd ground 8 rxoc- negative lvds differential clock input. (odd) 9 rxoc+ positive lvds differential clock input. (odd) 10 rxo3- negative lvds differential data input. channel o3(odd) 11 rxo3+ positive lvds differential data input. channel o3 (odd) 12 rxe0- negative lvds differential data input. channel e0 (even) 13 rxe0+ positive lvds differential data input. channel e0 (even) 14 gnd ground 15 rxe1- negative lvds differential data input. channel e1 (even) 16 rxe1+ positive lvds differential data input. channel e1 (even) 17 gnd ground 18 rxe2- negative lvds differential data input. channel e2 (even) 19 rxe2+ positive lvds differential data input. channel e2 (even) 20 rxec- negative lvds differential clock input. (even) 21 rxec+ positive lvds differential clock input. (even) 22 rxe3- negative lvds differential data input. channel e3 (even) 23 rxe3+ positive lvds differential data input. channel e3 (even) 24 gnd ground 25 test test pin should be tied to ground. 26 nc not connection. 27 sellvds sellvds pin should be tied to ground or open. 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply note (1) connector part no.: fi-xb30srl-hf11(jae). note (2) mating connector part no .:fi-x30h ; fi-x30c* ; fi-x30m* ; fi-x30hl(-t),fi-x30c*l(-t) [jae] note (3) the first pixel is odd. note (4) input signal of even and odd clock should be the same timing.
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 13 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 sellvds = low or open lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel e0 data order eg0 er5 er4 er3 er2 er1 er0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel e1 data order eb1 eb0 eg5 eg4 eg3 eg2 eg1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel e2 data order de na na eb5 eb4 eb3 eb2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel e3 data order na eb7 eb6 eg7 eg6 er7 er6 lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel o0 data order og0 or5 or4 or3 or2 or1 or0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel o1 data order ob1 ob0 og5 og4 og3 og2 og1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel o2 data order de na na ob5 ob4 ob3 ob2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel o3 data order na ob7 ob6 og7 og6 or7 or6
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 14 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 5.2 backlight unit pin symbol description remark 1 hv high voltage pink 2 lv low voltage white 1 hv high voltage blue 2 lv low voltage black note (1) connector part no.: jst-bhsr-02vs-1 or equivalent note (2) user?s connector part no.: jst-sm02b-bhss-1-tb (jst) or equivalent 5.3 color data input assignment the brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 15 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note frequency fc - 54 67.5 mhz - period tc 14.8 18.5 - ns high time tch - 4/7 - tc - lvds clock low time tcl - 3/7 - tc - setup time tlvs 600 - - ps - lvds data hold time tlvh 600 - - ps - frame rate fr 56 60 75 hz tv=tvd+tvb total tv 1034 1066 1274 th - display tvd 1024 1024 1024 th - vertical active display term blank tvb tv-tvd 42 tv-tvd th - total th tbd 844 tbd tc th=thd+thb display thd 640 640 640 tc - horizontal active display term blank thb th-thd 204 th-thd tc - note ?g (1) because this module is operated by de onl y mode, hsync and vsync input signals should be set to low logic level or ground. otherwise, this module would operate abnormally. (2) the relationship between fc and th must co mply with the (th-216)/fc>9.3 criterion. input signal timing diagram
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 16 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd module, the power on/off sequence should follow the conditions shown in the following diagram. note. (1) the supply voltage of the external system for the modul e input should be the same as the definition of vcc. (2) please apply the lamp voltage within the lcd operat ion range. when the backlight turns on before the lcd operation of the lcd turns off, the display may, instantly, function abnormally. (3) in case of vcc = off level, please keep the level of input signals on the low or keep a high impedance. (4) t4 should be measured after the module has been fully discharged between power on/off periods. (5) interface signal shall not be kept at high impedance when the power is on.
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 17 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 5.0 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l (6.5) ma inverter driving frequency f l 50 khz inverter 7.2 optical specifications the relative measurement methods of optical characte ristics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (6). item symbol condition min. typ. max. unit note contrast ratio cr (300) (450) - - (2), (6) t r - (5) (7) ms response time t f - (11) (14) ms (3) center luminance of white l c (230) (300) - cd/m 2 (4), (6) white variation w - (1.25) (1.33) - (6), (7) cross talk ct - - (2.0) % (5), (6) rx (0.644) - red ry (0.355) - gx (0.295) - green gy (0.596) - bx (0.145) - blue by (0.074) - wx (0.313) - color chromaticity white wy x =0 , y =0 viewing normal angle typ - 0.03 (0.329) typ + 0.03 - (1), (6) x + (60) (70) - horizontal x - (60) (70) - y + (50) (60) - vertical y - cr 10 (50) (60) - x + (70) (80) - horizontal x - (70) (80) - y + (70) (80) - viewing angle vertical y - cr 5 (70) (80) - deg. (1), (6) tco?99 luminance uniformity (angular-dependent) l r - - - 1.7 - (8) tco?99 luminance contrast (angular-dependent) c m - 0.5 - - - (9)
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 18 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (7). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o optical response 100% 90% 10% 0% gray level 255 gray level 0 gra y level 255 time t r t f
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 19 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (4) definition of luminance of white (l c ): measure the luminance of gray level 255 at center point l c = l (5) l (x) is corresponding to the luminance of the point x at figure in note (7). note (5) definition of cross talk (ct): ct = | y b ? y a | / y a 100 (%) where: y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note (6) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. a ctive area y a, u (d/2,w/8) y a, r (7d/8,w/2) y a, d (d/2,7w/8) y a, l (d/8,w/2) (0, 0) (d,w) gray 128 a ctive area gray 0 (d/4,w/4) (3d/4,3w/4) (0, 0) y b, u (d/2,w/8) y b, r (7d/8,w/2) y b, d (d/2,7w/8) y b, l (d/8,w/2) (d,w) gra y 128 photometer (topcon bm-5a) field of view = 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux)
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 20 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (7) definition of white variation ( w): measure the luminance of gray level 255 at 9 points w = d w active area vertical line horizontal line : test point x=1 to 9 5 d/2 w/2 x d/10 9w/10 w/10 9d/10 1 2 3 7 8 9 4 6 maximum [l (1), l (2), l (3), l (4), l (5), l (6), l (7), l (8), l (9)] minimum [l (1), l (2), l (3), l (4), l (5), l (6), l (7), l (8), l (9)]
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 21 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (8) definition of tco 99 luminance uniformity (angular-dependent) (l r ): luminance is measured at the c enter measurement position ?c? on the lcd panel. the optical axis of the luminance meter shall be aligned with the normal of the panel surface. the measuring distance between the photometer and t he surface of the panel is defined as: md (cm) = diagonal of the panel (cm) x 1.5 with minimum distance 50 cm. the panel is rotated around a vertical axis whic h passes the center of the display by changing the azimuthal angle to +30 . the distance between the panel and the photometer remains unchanged and the measured point is exact the same as the previous measured point. the photometer is then rotated by changing its azimuthal angle with the fixed distance to the panel. luminance at points ?l? and ?r? are given: l min, +30 and l max, +30 the lcd panel is then rotated to another azimuthal angle to -30 ; and l min, -3 and l max, -30 are obtained by using the same procedure. the luminance uniformity (l r ) is calculated as follow: l r = (( l max, +30 / l min, +30 )+( l max, -30 / l min, -30 )) / 2. l 30 l min, +30 l max, +30 lcd panel photometer r c w/2 d w 0.1 d 0.1 d w/2 d/2 d/2 md
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 22 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 note (9) definition of tco 99 luminance contrast (angular-dependent) (cm): luminance contrast is measured at the center poi nt of the lcd panel ?c? along with the normal of the display with the same distance described in note 13. the display is then rotated around the vertical axis by changing its azimuthal axis to +30 ; and this gives: l 255 g. l . , + 3 0 and l 0 g.l., +30 . the lcd panel is then rotated to azimuthal angle to -30 ; and l 0 g. l., -30 and l 255 g.l., -30 are obtained by using the same procedure. the luminance contrast (cm) is calculated: cm = ( l 255 g. l . - l 0 g.l. )/ ( l 255 g. l . + l 0 g.l ) for both +30 and -30 . the lower value for cm is reported. 30 lcd panel photometer c d w w/2 w/2 d/2 d/2
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 23 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 8. packaging 8.1 packing specifications (1) 5 lcd modules / 1 box (2) box dimensions: 537(l) x 316(w) x 462(h) mm (3) weight: approximately 12kg (5 modules per box) 8.2 packing method (1) carton packing should have no failure in the following reliability test items. test item test conditions note vibration ista standard random, frequency range: 1 ? 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation dropping test 1 angle, 3 edge, 6 face, 60cm non operation figure. 8-1 packing method +z
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 24 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 figure. 8-2 packing method
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 25 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 9. definition of labels 9.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: m170e5 -l05 (b) revision: rev. xx, for example: a0, a1? b1, b2? or c1, c2?etc. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2000~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i ,o, and u. (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product (d) product line: 1 -> line1, 2 -> line 2, ?etc. product line year, month, date cmo internal use cmo internal use revision cmo internal use serial no. chi mei optoelectronics made in taiwan e207943 made in taiwan m170e5 -l05 rev. xx x x x x x x x y m d l n n n n
dcc no.:24035047 issued date: may. 08, 2003 model no.: m170e5 -l05 preliminary 26 / 28 the information described in this specification is pre liminary and it is possible to be changed without prior notice. please contact cmo ?s representative while your product design is based on this specification. version 1.1 10. precautions 10.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleani ng, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or contacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the performance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slowly, and the starting voltage of ccfl will be higher than room temperature. 10.2 safety precautions (1) the startup voltage of backlight is approximat ely 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage.

▲Up To Search▲

Price & Availability of M170E5-L05

	To Download M170E5-L05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .